Logic: Sync transmission MTC or MIDI beat clocks

From WikiAudio

Jump to: navigation, search

[edit] Logic 9:Sync transmission, MTC & MIDI beat clocks

The Logic 9 instructions are nearly identical to the Logic 8 instructions. The only difference is graphical interface has minor and insignificant differences.

[edit] Logic 8: Sync transmission, MTC & MIDI beat clocks

To transmit either beat clocks or MIDI time code from Logic - follow these menus.


Logic main menu.JPG



Make sure you select the "Sync" tab and then MIDI sync project settings



Logic MIDI sync project settings.JPG


The picture below shows how to choose which MIDI port of your MIDI interface Logic will transmit MIDI time code out of. Check the "transmit MTC" box then choose the port(s) you want and and close the window.


Logic MTC select.JPG



The picture below shows how to choose which MIDI port of your MIDI interface Logic will transmit MIDI beat clocks out of. Check the "transmit MIDI clock" box , choose the port(s) you want and close the window.

Logic Beat clocks.JPG


In order to have cycle mode allow external devices to "cycle along" ,you should also enable the Allow to send Song Position Pointer while playing option.

Retrieved from "http://en.wikiaudio.org/Logic:_Sync_transmission_MTC_or_MIDI_beat_clocks"